Certified FD90 and FD120 fire doors for Devon
We supply and fit FD90 and FD120 fire doors across Devon, including Plymouth, Exeter and Paignton. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.
Regulations for FD90 and FD120 fire doors in Devon
New and replacement fire doors in Devon are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
FD90 and FD120 fire doors prices in Devon
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Devon quote is fixed after survey and itemised door by door.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Buildings that need FD90 and FD120 fire doors
Devon's demand comes from Plymouth's post-war city centre and naval estate, Exeter's offices and student housing, and coastal hotels.
- Transformer and switch rooms
- Generator rooms
- High fire-load stores
- Separating walls with long ratings
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD90 and FD120 fire doors in Devon
Can you work around tenants or staff?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset.
Is the survey free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
Towns in Devon we cover for FD90 and FD120 fire doors
FD90 & FD120 Doorsets in neighbouring areas
Other fire doors in Devon
- FD30 Fire Doorsets in Devon
- FD30S Smoke Control Doorsets in Devon
- FD60 Fire Doorsets in Devon
- Flat Entrance Fire Doors in Devon
- Communal & Corridor Fire Doors in Devon
- Stairwell & Escape Route Doors in Devon
- HMO Fire Doors in Devon
- Fire Doors for Homes in Devon
- Riser & Service Cupboard Doors in Devon
- Commercial & Office Fire Doors in Devon
- School & Healthcare Fire Doors in Devon
- Timber Fire Doorsets in Devon
- Composite Fire Doors in Devon
- Steel Fire Doors in Devon
- Glazed Fire Doors in Devon
- Double & Leaf-and-a-Half Fire Doors in Devon
- Fire-Rated Screens & Fanlights in Devon
- Acoustic Fire Doors in Devon
- Security Fire Doors in Devon
- Fire Exit Doors in Devon
- Fire Door Ironmongery & Closers in Devon
- Fire Door Replacement in Devon
- Fire Door Supply & Fit in Devon
- All fire doors in Devon