Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD90FD120Steel

FD90 & FD120 Doorsets in South Glamorgan

We supply and fit FD90 and FD120 fire doors throughout South Glamorgan, including Cardiff, Barry and Penarth, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,900 per single doorset in South Glamorgan, supplied & fitted, ex VAT

Grey steel double doorset in a plant room corridor

FD90 & FD120 Doorsets for South Glamorgan buildings

Across South Glamorgan we handle FD90 and FD120 fire doors for single doors and whole-building programmes alike — survey, fixed quote, certified doorsets and careful installation.

What the law says in South Glamorgan

Wales issues its own version of Approved Document B, so new and replacement fire doors in South Glamorgan are specified against the Welsh guidance. The Regulatory Reform (Fire Safety) Order 2005 applies in Wales, covering workplaces and the common parts of multi-occupied residential buildings, including flat entrance doors.

Cost of FD90 and FD120 fire doors in South Glamorgan

Guide prices for FD90 and FD120 fire doors in South Glamorgan run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.

The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.

Buildings that need FD90 and FD120 fire doors

Cardiff's city-centre apartments, student housing and offices lead demand, with Barry and Penarth adding converted houses and care homes.

  • Transformer and switch rooms
  • Generator rooms
  • High fire-load stores
  • Separating walls with long ratings

FD90 & FD120 Doorsets: key specification

Fire resistance90 or 120 minutes (E90 / E120, EI where specified)
ConstructionUsually steel; some specialist timber systems
Typical usePlant rooms, transformer rooms, high-fire-load stores
ConfigurationsSingle, double, with or without vision panels
HardwareSteel-specific hinges, closers, panic hardware where needed
Elevation drawing of fd90 & fd120 doorsets

See the full specification and options for FD90 & FD120 Doorsets

Four steps to compliant doors

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Your questions answered

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset.

Can you fit just one door?

Yes — from a single door to a full building.

Do these doors need panic hardware?

Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.

Towns in South Glamorgan we cover for FD90 and FD120 fire doors

FD90 & FD120 Doorsets in neighbouring areas

Other fire doors in South Glamorgan

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.