Double & Leaf-and-a-Half Fire Doors for Battersea buildings
We cover Battersea and nearby Chelsea for double fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Battersea is about 2 miles from London; we cover both, along with Chelsea, Pimlico and Westminster.
What the law says in Battersea
In Battersea, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Double fire doors prices in Battersea
Guide prices for double fire doors in Battersea run from about £1,600 to £3,400 per pair, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Battersea
In Battersea, double fire doors are typically needed in wide risers and cross-corridor openings.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Wide risers
- Cross-corridor openings
- Plant room access
- Care and hospital routes
Double & Leaf-and-a-Half Fire Doors: key specification
| Configurations | Equal pairs, unequal (leaf-and-a-half), rebated or square meeting stiles |
|---|---|
| Coordination | Door selectors to BS EN 1158 for rebated pairs |
| Bolts | Tested flush bolts on inactive leaves (not on escape routes) |
| Hold-open | Alarm-linked hold-open per leaf where needed |
| Ratings | FD30S and FD60S typical |
See the full specification and options for Double & Leaf-and-a-Half Fire Doors
How it works in Battersea
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Double fire doors in Battersea: questions
What does a Battersea quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you fit just one door in Battersea?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Can you work around tenants or staff in Battersea?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can double fire doors be held open?
Yes, with alarm-linked hold-open devices on each leaf.
Nearby towns we cover
- Chelsea (1 mile)
- Pimlico (1 mile)
- Westminster (2 miles)
- Fulham (2 miles)
- Brixton (2 miles)
- London (2 miles)
Other fire doors in Battersea
- Acoustic Fire Doors in Battersea
- Security Fire Doors in Battersea
- FD90 & FD120 Doorsets in Battersea
- Riser & Service Cupboard Doors in Battersea
- HMO Fire Doors in Battersea
- Fire Exit Doors in Battersea
- Fire-Rated Screens & Fanlights in Battersea
- Stairwell & Escape Route Doors in Battersea
- Double & Leaf-and-a-Half Fire Doors across Greater London
- All fire doors in Battersea
