Commercial & Office Fire Doors for Battersea buildings
Looking for commercial fire doors in Battersea? Our supply and fit service covers SW11 and the surrounding area, including Chelsea and Pimlico. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Battersea is about 2 miles from London. Wherever your building is in SW11, we arrange survey and fitting dates around access and occupancy.
Regulations for commercial fire doors in Greater London
Because Battersea is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of commercial fire doors in Greater London
Expect roughly £850–£1,500 per single doorset for commercial fire doors, fitted, ex VAT. Your Battersea quote is fixed after survey and itemised door by door.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Buildings that need commercial fire doors
Typical uses for commercial fire doors in Battersea include office fit-outs and hotels.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Office fit-outs
- Hotels
- Retail units
- Restaurants and commercial kitchens
Commercial & Office Fire Doors: key specification
| Rating | FD30 or FD30S typical; FD60 to cores and plant |
|---|---|
| Finishes | Oak, walnut or ash veneer, laminate, paint-grade |
| Access control | Electric locks and maglocks tested with the doorset |
| Glazing | Narrow or full vision panels |
| Compliance | Fire risk assessment under the fire safety law where the building is |
See the full specification and options for Commercial & Office Fire Doors
What happens next
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Commercial fire doors in Battersea: questions
What does a Battersea quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Is the survey in Battersea free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can you work around tenants or staff in Battersea?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can I add access control to my fire doors?
Yes, using hardware covered by the doorset's evidence. Retro-fitting untested components can void certification.
Commercial & Office Fire Doors near Battersea
- Chelsea (1 mile)
- Pimlico (1 mile)
- Westminster (2 miles)
- Fulham (2 miles)
- Brixton (2 miles)
- London (2 miles)
Also available in Battersea
- FD30S Smoke Control Doorsets in Battersea
- Security Fire Doors in Battersea
- Fire Door Replacement in Battersea
- FD60 Fire Doorsets in Battersea
- Timber Fire Doorsets in Battersea
- Communal & Corridor Fire Doors in Battersea
- HMO Fire Doors in Battersea
- Fire Door Supply & Fit in Battersea
- Commercial & Office Fire Doors across Greater London
- All fire doors in Battersea