Getting fire door closers and ironmongery fitted in Barnet
Getting fire door closers and ironmongery right in Barnet means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Where possible we combine Barnet surveys with other visits in Greater London, such as Hadley Wood and Potters Bar, which helps keep survey dates flexible.
Fire door rules in Barnet
Because Barnet is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Guide prices in Barnet
Our guide price for fire door closers and ironmongery in Barnet is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where fire door closers and ironmongery are used in Barnet
In Barnet, fire door closers and ironmongery are typically needed in busy corridors needing hold-open and seal and signage replacement.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Busy corridors needing hold-open
- Seal and signage replacement
- Access control preparation
- Failed closers and hinges
Fire Door Ironmongery & Closers: key specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Fire door closers and ironmongery in Barnet: questions
Which rules do fire door closers and ironmongery in Barnet need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Will I get certificates for the doors fitted in Barnet?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
What does a Barnet quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
How many hinges does a fire door need?
Most timber fire doors need three hinges; heavier FD60 leaves often need four. The evidence decides.
Nearby towns we cover
- Hadley Wood (2 miles)
- Potters Bar (3 miles)
- Borehamwood (3 miles)
- Finchley (3 miles)
- Muswell Hill (5 miles)
- Enfield (5 miles)
Other fire doors in Barnet
- Composite Fire Doors in Barnet
- Flat Entrance Fire Doors in Barnet
- FD90 & FD120 Doorsets in Barnet
- Fire Door Supply & Fit in Barnet
- Glazed Fire Doors in Barnet
- FD30S Smoke Control Doorsets in Barnet
- Stairwell & Escape Route Doors in Barnet
- Communal & Corridor Fire Doors in Barnet
- Fire Door Ironmongery & Closers across Greater London
- All fire doors in Barnet