Certified FD90 and FD120 fire doors for Barnet
We cover Barnet and nearby Hadley Wood for FD90 and FD120 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Barnet is about 11 miles from London. Wherever your building is in EN5, we arrange survey and fitting dates around access and occupancy.
Fire door rules in Barnet
Fire doors in Barnet sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD90 and FD120 fire doors cost in Barnet?
Guide prices for FD90 and FD120 fire doors in Barnet run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Barnet
Generator rooms and high fire-load stores are among the most common settings for FD90 and FD120 fire doors, in Barnet as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Generator rooms
- High fire-load stores
- Transformer and switch rooms
- Separating walls with long ratings
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Greater London
Is the survey in Barnet free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Barnet.
Do you cover Barnet?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Barnet and the rest of Greater London, including EN5 and nearby Hadley Wood.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Nearby towns we cover
- Hadley Wood (2 miles)
- Potters Bar (3 miles)
- Borehamwood (3 miles)
- Finchley (3 miles)
- Muswell Hill (5 miles)
- Enfield (5 miles)
Other products in Barnet
- Steel Fire Doors in Barnet
- Communal & Corridor Fire Doors in Barnet
- Fire Door Supply & Fit in Barnet
- Acoustic Fire Doors in Barnet
- Security Fire Doors in Barnet
- Double & Leaf-and-a-Half Fire Doors in Barnet
- Fire Door Replacement in Barnet
- Commercial & Office Fire Doors in Barnet
- FD90 & FD120 Doorsets across Greater London
- All fire doors in Barnet