Certified FD60 fire doors for Aylesbury
Need FD60 fire doors in Aylesbury? We supply and fit complete certified doorsets across Buckinghamshire, starting with a free measure survey in and around HP20. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Where possible we combine Aylesbury surveys with other visits in Buckinghamshire, such as Leighton Buzzard and Berkhamsted, which helps keep survey dates flexible.
Fire door rules in Aylesbury
Because Aylesbury is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do FD60 fire doors cost in Aylesbury?
Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Aylesbury are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where FD60 fire doors are needed
Wherever they are in Aylesbury, FD60 fire doors are most often specified for plant and boiler rooms and compartment walls.
Buckinghamshire runs from Milton Keynes' modern estates, offices and warehouses to period market towns with converted commercial buildings.
- Plant and boiler rooms
- Compartment walls
- Higher-risk stores
- Stair cores in taller blocks
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
How it works in Aylesbury
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Buckinghamshire
Will I get certificates for the doors fitted in Aylesbury?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Which rules do FD60 fire doors in Aylesbury need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can you work around tenants or staff in Aylesbury?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Nearby towns we cover
- Leighton Buzzard (10 miles)
- Berkhamsted (11 miles)
- Chesham (12 miles)
- Bletchley (12 miles)
- High Wycombe (13 miles)
- Dunstable (13 miles)
Other fire doors in Aylesbury
- HMO Fire Doors in Aylesbury
- Flat Entrance Fire Doors in Aylesbury
- FD30S Smoke Control Doorsets in Aylesbury
- School & Healthcare Fire Doors in Aylesbury
- Stairwell & Escape Route Doors in Aylesbury
- Double & Leaf-and-a-Half Fire Doors in Aylesbury
- Composite Fire Doors in Aylesbury
- Riser & Service Cupboard Doors in Aylesbury
- FD60 Fire Doorsets across Buckinghamshire
- All fire doors in Aylesbury