Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in Buckinghamshire

We supply and fit FD30S fire doors throughout Buckinghamshire, including Milton Keynes, High Wycombe and Aylesbury, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £800 per single doorset in Buckinghamshire, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

Getting FD30S fire doors fitted in Buckinghamshire

We supply and fit FD30S fire doors across Buckinghamshire, including Milton Keynes, High Wycombe and Aylesbury. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.

What the law says in Buckinghamshire

New and replacement fire doors in Buckinghamshire are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.

Guide prices in Buckinghamshire

Expect roughly £800–£1,250 per single doorset for FD30S fire doors, fitted, ex VAT. Your Buckinghamshire quote is fixed after survey and itemised door by door.

The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.

Where FD30S fire doors are used in Buckinghamshire

Buckinghamshire runs from Milton Keynes' modern estates, offices and warehouses to period market towns with converted commercial buildings.

  • Protected stairways
  • Cross-corridor doors
  • Integral garage doors
  • Lobby doors in blocks of flats

Doorset specification

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

Four steps to compliant doors

  1. Request a quote online or call
  2. Survey: sizes, ratings, hardware and condition
  3. Quote with each doorset's certification
  4. Phased fitting and handover records

FD30S fire doors in Buckinghamshire: questions

How quickly can you survey in Buckinghamshire?

We arrange surveys around your access needs and, where possible, combine visits with other work in Buckinghamshire. Tell us your preferred dates when you enquire.

Do you cover the whole of Buckinghamshire?

Yes. We survey, supply and fit FD30S fire doors across Buckinghamshire, including Milton Keynes, High Wycombe and Aylesbury.

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Do smoke seals stop the door closing?

They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.

Towns in Buckinghamshire we cover for FD30S fire doors

FD30S Smoke Control Doorsets in neighbouring areas

Other fire doors in Buckinghamshire

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.