FD60 fire doors in High Wycombe: how we work
Getting FD60 fire doors right in High Wycombe means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
High Wycombe is about 29 miles from Milton Keynes; we cover both, along with Amersham, Maidenhead and Chesham.
Fire door rules in High Wycombe
Because High Wycombe is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
FD60 fire doors prices in High Wycombe
Guide prices for FD60 fire doors in High Wycombe run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Typical uses in High Wycombe
Typical uses for FD60 fire doors in High Wycombe include higher-risk stores and stair cores in taller blocks.
Buckinghamshire runs from Milton Keynes' modern estates, offices and warehouses to period market towns with converted commercial buildings.
- Higher-risk stores
- Stair cores in taller blocks
- Plant and boiler rooms
- Compartment walls
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Buckinghamshire
Which rules do FD60 fire doors in High Wycombe need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in High Wycombe.
Do you cover High Wycombe?
Yes. We survey, supply and fit FD60 fire doors throughout High Wycombe and the rest of Buckinghamshire, including HP11 and nearby Amersham.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
FD60 Fire Doorsets near High Wycombe
- Amersham (6 miles)
- Maidenhead (7 miles)
- Chesham (8 miles)
- Chalfont St Peter (9 miles)
- Gerrards Cross (9 miles)
- Slough (11 miles)
Other fire doors in High Wycombe
- FD90 & FD120 Doorsets in High Wycombe
- FD30 Fire Doorsets in High Wycombe
- Flat Entrance Fire Doors in High Wycombe
- Fire Door Supply & Fit in High Wycombe
- Timber Fire Doorsets in High Wycombe
- Glazed Fire Doors in High Wycombe
- Fire Door Replacement in High Wycombe
- Fire Doors for Homes in High Wycombe
- FD60 Fire Doorsets across Buckinghamshire
- All fire doors in High Wycombe