Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Gerrards Cross

We supply and fit FD60 fire doors in Gerrards Cross (SL9) as complete certified doorsets — surveyed free, quoted door by door with each manufacturer's certificate reference, and fitted to the manufacturer's instructions.

From £1,050 per single doorset in Gerrards Cross, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

Our Gerrards Cross supply and fit service

If your fire risk assessment in Gerrards Cross has flagged doors to replace, we can schedule, quote and fit FD60 doorsets for compartment walls, cores and plant rooms to match its recommendations. Surveys in SL9 are free and quotes are fixed and itemised.

Our Buckinghamshire coverage includes Gerrards Cross and its neighbours Chalfont St Peter, Uxbridge and Rickmansworth; tell us your postcode and preferred dates and we'll confirm a survey slot.

What the law says in Gerrards Cross

Because Gerrards Cross is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

What do FD60 fire doors cost in Gerrards Cross?

Our guide for FD60 fire doors is £1,050–£1,650 per single doorset fitted, ex VAT. Quotes for Gerrards Cross are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.

Buildings that need FD60 fire doors

Typical uses for FD60 fire doors in Gerrards Cross include compartment walls and stair cores in taller blocks.

Buckinghamshire runs from Milton Keynes' modern estates, offices and warehouses to period market towns with converted commercial buildings.

  • Compartment walls
  • Stair cores in taller blocks
  • Higher-risk stores
  • Plant and boiler rooms

FD60 Fire Doorsets: key specification

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

From enquiry to handover

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Common questions in Buckinghamshire

Will I get certificates for the doors fitted in Gerrards Cross?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Which rules do FD60 fire doors in Gerrards Cross need to meet?

They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Can you fit just one door in Gerrards Cross?

Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Buckinghamshire.

Is there an FD60S?

Yes. FD60S doorsets have tested smoke seals as well as 60 minutes of fire resistance.

Neighbouring areas

Other products in Gerrards Cross

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.