Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
BS EN 1154BS EN 1935BS EN 1155

Fire Door Ironmongery & Closers in Greater Manchester

We supply and fit fire door closers and ironmongery throughout Greater Manchester, including Manchester, Oldham and Wigan, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £120 per item in Greater Manchester, supplied & fitted, ex VAT

Overhead door closer fitted to a white fire door and frame

Fire door closers and ironmongery in Greater Manchester: how we work

Across Greater Manchester we handle fire door closers and ironmongery for single doors and whole-building programmes alike — survey, fixed quote, certified doorsets and careful installation.

Which rules apply in Greater Manchester?

Because Greater Manchester is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

What do fire door closers and ironmongery cost in Greater Manchester?

Our guide for fire door closers and ironmongery is £120–£500 per item fitted, ex VAT. Quotes for Greater Manchester are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.

Typical uses in Greater Manchester

Greater Manchester combines city-centre apartment towers in Manchester and Salford with converted mills, large post-war estates and busy town centres across the boroughs.

  • Failed closers and hinges
  • Busy corridors needing hold-open
  • Seal and signage replacement
  • Access control preparation

What you get with each doorset

ClosersOverhead and concealed closers to BS EN 1154
HingesCE/UKCA-marked butt hinges to BS EN 1935
Hold-openElectromagnetic and free-swing devices to BS EN 1155
Locks & latchesTo BS EN 12209, tested with the doorset
Seals & signsIntumescent and smoke seals; mandatory fire door signage
Elevation drawing of fire door ironmongery & closers

See the full specification and options for Fire Door Ironmongery & Closers

How it works in Greater Manchester

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

Fire door closers and ironmongery in Greater Manchester: questions

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset.

Which rules apply in Greater Manchester?

Doors are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

How many hinges does a fire door need?

Most timber fire doors need three hinges; heavier FD60 leaves often need four. The evidence decides.

Towns in Greater Manchester we cover for fire door closers and ironmongery

Fire Door Ironmongery & Closers in neighbouring areas

Other fire doors in Greater Manchester

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.