Our Chester supply and fit service
For landlords, managing agents, businesses and homeowners in Chester, we provide fire door closers, hinges and hold-open devices with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
Chester is about 19 miles from Warrington. Wherever your building is in CH1, we arrange survey and fitting dates around access and occupancy.
Fire door rules in Chester
Because Chester is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Fire door closers and ironmongery prices in Chester
Expect roughly £120–£500 per item for fire door closers and ironmongery, fitted, ex VAT. Your Chester quote is fixed after survey and itemised door by door.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Buildings that need fire door closers and ironmongery
Failed closers and hinges and seal and signage replacement are among the most common settings for fire door closers and ironmongery, in Chester as elsewhere.
Cheshire spans Warrington's warehouses and offices, Chester's historic centre and the new-build estates around Crewe.
- Failed closers and hinges
- Seal and signage replacement
- Busy corridors needing hold-open
- Access control preparation
What you get with each doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about fire door closers and ironmongery in Chester
Can you work around tenants or staff in Chester?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can you fit just one door in Chester?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Cheshire.
Is the survey in Chester free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you install hold-open devices?
We fit the devices; connection to the fire alarm panel is done by your alarm engineer, whom we coordinate with.
Neighbouring areas
- Hawarden (6 miles)
- Deeside (6 miles)
- Ellesmere Port (6 miles)
- Buckley (8 miles)
- Garston (10 miles)
- Speke (11 miles)
Also available in Chester
- FD30 Fire Doorsets in Chester
- Fire Door Supply & Fit in Chester
- Riser & Service Cupboard Doors in Chester
- Double & Leaf-and-a-Half Fire Doors in Chester
- Fire-Rated Screens & Fanlights in Chester
- Fire Exit Doors in Chester
- FD30S Smoke Control Doorsets in Chester
- School & Healthcare Fire Doors in Chester
- Fire Door Ironmongery & Closers across Cheshire
- All fire doors in Chester