Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD90FD120Steel

FD90 & FD120 Doorsets in Nottinghamshire

We supply and fit FD90 and FD120 fire doors throughout Nottinghamshire, including Nottingham, Mansfield and Worksop, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,900 per single doorset in Nottinghamshire, supplied & fitted, ex VAT

Grey steel double doorset in a plant room corridor

FD90 and FD120 fire doors in Nottinghamshire: how we work

Throughout Nottinghamshire, including Nottingham, Mansfield and Worksop, we survey, quote and fit FD90 and FD120 steel doorsets for plant and high-risk rooms as complete certified doorsets, with the manufacturer's certificate reference on every quote.

What the law says in Nottinghamshire

In Nottinghamshire, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

Guide prices in Nottinghamshire

Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Nottinghamshire are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Buildings that need FD90 and FD120 fire doors

Nottingham's city-centre apartments and two universities create strong demand, with Mansfield and the market towns adding industrial and care settings.

  • Transformer and switch rooms
  • Generator rooms
  • High fire-load stores
  • Separating walls with long ratings

Doorset specification

Fire resistance90 or 120 minutes (E90 / E120, EI where specified)
ConstructionUsually steel; some specialist timber systems
Typical usePlant rooms, transformer rooms, high-fire-load stores
ConfigurationsSingle, double, with or without vision panels
HardwareSteel-specific hinges, closers, panic hardware where needed
Elevation drawing of fd90 & fd120 doorsets

See the full specification and options for FD90 & FD120 Doorsets

Four steps to compliant doors

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Your questions answered

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

How quickly can you survey in Nottinghamshire?

We arrange surveys around your access needs and, where possible, combine visits with other work in Nottinghamshire. Tell us your preferred dates when you enquire.

Do you cover the whole of Nottinghamshire?

Yes. We survey, supply and fit FD90 and FD120 fire doors across Nottinghamshire, including Nottingham, Mansfield and Worksop.

Do these doors need panic hardware?

Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.

Towns in Nottinghamshire we cover for FD90 and FD120 fire doors

FD90 & FD120 Doorsets in neighbouring areas

Other fire doors in Nottinghamshire

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.