Certified FD90 and FD120 fire doors for Lincolnshire
Our Lincolnshire service covers FD90 and FD120 fire doors for flats, HMOs, workplaces, schools and homes, including Lincoln, Grimsby and Scunthorpe.
What the law says in Lincolnshire
Because Lincolnshire is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do FD90 and FD120 fire doors cost in Lincolnshire?
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Lincolnshire are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need FD90 and FD120 fire doors
Lincolnshire's demand spans Lincoln's student housing and city centre, Grimsby and Scunthorpe's industry, and coastal holiday accommodation.
- Transformer and switch rooms
- Generator rooms
- High fire-load stores
- Separating walls with long ratings
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Common questions in Lincolnshire
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset.
Do you cover the whole of Lincolnshire?
Yes. We survey, supply and fit FD90 and FD120 fire doors across Lincolnshire, including Lincoln, Grimsby and Scunthorpe.
Can you work around tenants or staff?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Towns in Lincolnshire we cover for FD90 and FD120 fire doors
FD90 & FD120 Doorsets in neighbouring areas
Other fire doors in Lincolnshire
- FD30 Fire Doorsets in Lincolnshire
- FD30S Smoke Control Doorsets in Lincolnshire
- FD60 Fire Doorsets in Lincolnshire
- Flat Entrance Fire Doors in Lincolnshire
- Communal & Corridor Fire Doors in Lincolnshire
- Stairwell & Escape Route Doors in Lincolnshire
- HMO Fire Doors in Lincolnshire
- Fire Doors for Homes in Lincolnshire
- Riser & Service Cupboard Doors in Lincolnshire
- Commercial & Office Fire Doors in Lincolnshire
- School & Healthcare Fire Doors in Lincolnshire
- Timber Fire Doorsets in Lincolnshire
- Composite Fire Doors in Lincolnshire
- Steel Fire Doors in Lincolnshire
- Glazed Fire Doors in Lincolnshire
- Double & Leaf-and-a-Half Fire Doors in Lincolnshire
- Fire-Rated Screens & Fanlights in Lincolnshire
- Acoustic Fire Doors in Lincolnshire
- Security Fire Doors in Lincolnshire
- Fire Exit Doors in Lincolnshire
- Fire Door Ironmongery & Closers in Lincolnshire
- Fire Door Replacement in Lincolnshire
- Fire Door Supply & Fit in Lincolnshire
- All fire doors in Lincolnshire