Getting FD90 and FD120 fire doors fitted in Worksop
Getting FD90 and FD120 fire doors right in Worksop means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
We cover S80 and the surrounding area, including Retford. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Worksop?
Because Worksop is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do FD90 and FD120 fire doors cost in Worksop?
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Worksop are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD90 and FD120 fire doors are used in Worksop
Wherever they are in Worksop, FD90 and FD120 fire doors are most often specified for generator rooms and high fire-load stores.
Nottingham's city-centre apartments and two universities create strong demand, with Mansfield and the market towns adding industrial and care settings.
- Generator rooms
- High fire-load stores
- Transformer and switch rooms
- Separating walls with long ratings
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Worksop
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Nottinghamshire
Is the survey in Worksop free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can you fit just one door in Worksop?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Nottinghamshire.
Can you work around tenants or staff in Worksop?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
FD90 & FD120 Doorsets near Worksop
- Retford (7 miles)
- Staveley (10 miles)
- Mansfield (12 miles)
- Chesterfield (12 miles)
- Rotherham (13 miles)
- Sutton-in-Ashfield (14 miles)
Other fire doors in Worksop
- FD30S Smoke Control Doorsets in Worksop
- Stairwell & Escape Route Doors in Worksop
- Riser & Service Cupboard Doors in Worksop
- HMO Fire Doors in Worksop
- Fire Door Ironmongery & Closers in Worksop
- FD30 Fire Doorsets in Worksop
- Timber Fire Doorsets in Worksop
- Composite Fire Doors in Worksop
- FD90 & FD120 Doorsets across Nottinghamshire
- All fire doors in Worksop