Our Nottinghamshire supply and fit service
Throughout Nottinghamshire, including Nottingham, Mansfield and Worksop, we survey, quote and fit FD30 doorsets for flats, offices, HMOs and corridors as complete certified doorsets, with the manufacturer's certificate reference on every quote.
What the law says in Nottinghamshire
In Nottinghamshire, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Guide prices in Nottinghamshire
Our guide price for FD30 fire doors in Nottinghamshire is £750 to £1,150 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need FD30 fire doors
Nottingham's city-centre apartments and two universities create strong demand, with Mansfield and the market towns adding industrial and care settings.
- Offices and retail back-of-house
- HMO bedrooms and kitchens
- Hotel corridors
- Plant rooms and stores
Doorset specification
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
Is the survey free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset.
Can you fit just one door?
Yes — from a single door to a full building.
How thick is an FD30 door?
Most FD30 timber leaves are 44mm thick. FD60 leaves are typically 54mm.
Towns in Nottinghamshire we cover for FD30 fire doors
- Arnold
- Hucknall
- Kirkby-in-Ashfield
- Mansfield
- Newark-on-Trent
- Nottingham
- Retford
- Sutton-in-Ashfield
- West Bridgford
- Worksop
FD30 Fire Doorsets in neighbouring areas
Other fire doors in Nottinghamshire
- FD30S Smoke Control Doorsets in Nottinghamshire
- FD60 Fire Doorsets in Nottinghamshire
- FD90 & FD120 Doorsets in Nottinghamshire
- Flat Entrance Fire Doors in Nottinghamshire
- Communal & Corridor Fire Doors in Nottinghamshire
- Stairwell & Escape Route Doors in Nottinghamshire
- HMO Fire Doors in Nottinghamshire
- Fire Doors for Homes in Nottinghamshire
- Riser & Service Cupboard Doors in Nottinghamshire
- Commercial & Office Fire Doors in Nottinghamshire
- School & Healthcare Fire Doors in Nottinghamshire
- Timber Fire Doorsets in Nottinghamshire
- Composite Fire Doors in Nottinghamshire
- Steel Fire Doors in Nottinghamshire
- Glazed Fire Doors in Nottinghamshire
- Double & Leaf-and-a-Half Fire Doors in Nottinghamshire
- Fire-Rated Screens & Fanlights in Nottinghamshire
- Acoustic Fire Doors in Nottinghamshire
- Security Fire Doors in Nottinghamshire
- Fire Exit Doors in Nottinghamshire
- Fire Door Ironmongery & Closers in Nottinghamshire
- Fire Door Replacement in Nottinghamshire
- Fire Door Supply & Fit in Nottinghamshire
- All fire doors in Nottinghamshire