Our Battersea supply and fit service
Fire Rated Doors supplies and fits FD90 and FD120 fire doors in Battersea, Greater London. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Battersea is about 2 miles from London; we cover both, along with Chelsea, Pimlico and Westminster.
What the law says in Battersea
In Battersea, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Cost of FD90 and FD120 fire doors in Greater London
Our guide price for FD90 and FD120 fire doors in Battersea is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD90 and FD120 fire doors are needed
Separating walls with long ratings and high fire-load stores are among the most common settings for FD90 and FD120 fire doors, in Battersea as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Separating walls with long ratings
- High fire-load stores
- Transformer and switch rooms
- Generator rooms
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Battersea
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Your questions answered
Do you cover Battersea?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Battersea and the rest of Greater London, including SW11 and nearby Chelsea.
How quickly can you survey in Battersea?
We arrange surveys around your access needs and, where possible, combine Battersea visits with other work in Greater London. Tell us your preferred dates when you enquire.
Can you work around tenants or staff in Battersea?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Nearby towns we cover
- Chelsea (1 mile)
- Pimlico (1 mile)
- Westminster (2 miles)
- Fulham (2 miles)
- Brixton (2 miles)
- London (2 miles)
Other products in Battersea
- School & Healthcare Fire Doors in Battersea
- Flat Entrance Fire Doors in Battersea
- Steel Fire Doors in Battersea
- Fire Doors for Homes in Battersea
- Communal & Corridor Fire Doors in Battersea
- Fire-Rated Screens & Fanlights in Battersea
- Fire Door Ironmongery & Closers in Battersea
- Glazed Fire Doors in Battersea
- FD90 & FD120 Doorsets across Greater London
- All fire doors in Battersea