FD90 and FD120 fire doors in Fulham: how we work
If your fire risk assessment in Fulham has flagged doors to replace, we can schedule, quote and fit FD90 and FD120 steel doorsets for plant and high-risk rooms to match its recommendations. Surveys in SW6 are free and quotes are fixed and itemised.
Fulham is about 4 miles from London. Wherever your building is in SW6, we arrange survey and fitting dates around access and occupancy.
What the law says in Fulham
New and replacement fire doors in Fulham are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
FD90 and FD120 fire doors prices in Fulham
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Fulham are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Buildings that need FD90 and FD120 fire doors
Typical uses for FD90 and FD120 fire doors in Fulham include transformer and switch rooms and high fire-load stores.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Transformer and switch rooms
- High fire-load stores
- Separating walls with long ratings
- Generator rooms
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Your questions answered
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Fulham.
Do you work for landlords and managing agents in Fulham?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Do you cover Fulham?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Fulham and the rest of Greater London, including SW6 and nearby Chelsea.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
Also covering towns near Fulham
- Chelsea (1 mile)
- Putney (2 miles)
- Battersea (2 miles)
- Shepherd's Bush (2 miles)
- Barnes (2 miles)
- Notting Hill (2 miles)
Also available in Fulham
- Commercial & Office Fire Doors in Fulham
- Fire Doors for Homes in Fulham
- Flat Entrance Fire Doors in Fulham
- Composite Fire Doors in Fulham
- Stairwell & Escape Route Doors in Fulham
- Fire Door Ironmongery & Closers in Fulham
- FD30 Fire Doorsets in Fulham
- Fire Door Replacement in Fulham
- FD90 & FD120 Doorsets across Greater London
- All fire doors in Fulham