Fire Door Ironmongery & Closers for Battersea buildings
We cover Battersea and nearby Chelsea for fire door closers and ironmongery, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
We cover SW11 and the surrounding area, including Chelsea. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Battersea?
Because Battersea is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do fire door closers and ironmongery cost in Battersea?
Guide prices for fire door closers and ironmongery in Battersea run from about £120 to £500 per item, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Battersea
Wherever they are in Battersea, fire door closers and ironmongery are most often specified for busy corridors needing hold-open and seal and signage replacement.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Busy corridors needing hold-open
- Seal and signage replacement
- Access control preparation
- Failed closers and hinges
What you get with each doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
What does a Battersea quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Which rules do fire door closers and ironmongery in Battersea need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you work for landlords and managing agents in Battersea?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
How many hinges does a fire door need?
Most timber fire doors need three hinges; heavier FD60 leaves often need four. The evidence decides.
Neighbouring areas
- Chelsea (1 mile)
- Pimlico (1 mile)
- Westminster (2 miles)
- Fulham (2 miles)
- Brixton (2 miles)
- London (2 miles)
Also available in Battersea
- Steel Fire Doors in Battersea
- Double & Leaf-and-a-Half Fire Doors in Battersea
- Composite Fire Doors in Battersea
- Communal & Corridor Fire Doors in Battersea
- HMO Fire Doors in Battersea
- Fire Door Supply & Fit in Battersea
- Riser & Service Cupboard Doors in Battersea
- Glazed Fire Doors in Battersea
- Fire Door Ironmongery & Closers across Greater London
- All fire doors in Battersea