Our Battersea supply and fit service
Fire Rated Doors supplies and fits communal fire doors in Battersea, Greater London. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Battersea is about 2 miles from London. Wherever your building is in SW11, we arrange survey and fitting dates around access and occupancy.
Fire door rules in Battersea
New and replacement fire doors in Battersea are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do communal fire doors cost in Battersea?
Budget around £1,600 to £3,200 per pair for communal fire doors supplied and fitted in Battersea, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Battersea
In Battersea, communal fire doors are typically needed in sheltered and supported housing and student accommodation.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Sheltered and supported housing
- Student accommodation
- Hotels
- Blocks of flats
What you get with each doorset
| Rating | FD30S typical; FD60S in some lobbies |
|---|---|
| Configuration | Singles, pairs and leaf-and-a-half |
| Glazing | Vision panels sized to the doorset's evidence |
| Hold-open | Alarm-linked magnetic hold-open or free-swing closers (BS EN 1155) |
| Accessibility | Opening forces and vision panels to accessibility guidance (Approved Document M in England) |
See the full specification and options for Communal & Corridor Fire Doors
How it works in Battersea
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about communal fire doors in Battersea
Can you fit just one door in Battersea?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Will I get certificates for the doors fitted in Battersea?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Is the survey in Battersea free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
How often should communal fire doors be checked?
In England, regulation 10 requires at least three-monthly checks in residential buildings with a storey above 11 metres. Good practice is regular checks in all buildings.
Communal & Corridor Fire Doors near Battersea
- Chelsea (1 mile)
- Pimlico (1 mile)
- Westminster (2 miles)
- Fulham (2 miles)
- Brixton (2 miles)
- London (2 miles)
Other products in Battersea
- HMO Fire Doors in Battersea
- Riser & Service Cupboard Doors in Battersea
- Fire Door Supply & Fit in Battersea
- FD30 Fire Doorsets in Battersea
- Fire Exit Doors in Battersea
- Composite Fire Doors in Battersea
- Timber Fire Doorsets in Battersea
- Fire Door Ironmongery & Closers in Battersea
- Communal & Corridor Fire Doors across Greater London
- All fire doors in Battersea