Getting FD90 and FD120 fire doors fitted in Chelsea
Getting FD90 and FD120 fire doors right in Chelsea means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Chelsea is about 2 miles from London; we cover both, along with Battersea, Fulham and Pimlico.
What the law says in Chelsea
In Chelsea, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Guide prices in Chelsea
Our guide price for FD90 and FD120 fire doors in Chelsea is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need FD90 and FD120 fire doors
Typical uses for FD90 and FD120 fire doors in Chelsea include high fire-load stores and transformer and switch rooms.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- High fire-load stores
- Transformer and switch rooms
- Generator rooms
- Separating walls with long ratings
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Chelsea
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
Can you work around tenants or staff in Chelsea?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Is the survey in Chelsea free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
What does a Chelsea quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Neighbouring areas
- Battersea (1 mile)
- Fulham (1 mile)
- Pimlico (1 mile)
- Westminster (2 miles)
- Notting Hill (2 miles)
- London (2 miles)
Other products in Chelsea
- Flat Entrance Fire Doors in Chelsea
- Timber Fire Doorsets in Chelsea
- Riser & Service Cupboard Doors in Chelsea
- Glazed Fire Doors in Chelsea
- Acoustic Fire Doors in Chelsea
- Steel Fire Doors in Chelsea
- Fire-Rated Screens & Fanlights in Chelsea
- FD60 Fire Doorsets in Chelsea
- FD90 & FD120 Doorsets across Greater London
- All fire doors in Chelsea