Our London supply and fit service
We fit FD90 and FD120 steel doorsets for plant and high-risk rooms in London and the rest of Greater London. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
We cover London and the rest of Greater London, with surveys arranged around your building's access and occupancy.
Which rules apply in London?
In London, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
FD90 and FD120 fire doors prices in London
Guide prices for FD90 and FD120 fire doors in London run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Buildings that need FD90 and FD120 fire doors
Wherever they are in London, FD90 and FD120 fire doors are most often specified for high fire-load stores and separating walls with long ratings.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- High fire-load stores
- Separating walls with long ratings
- Generator rooms
- Transformer and switch rooms
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Greater London
Can you fit just one door in London?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
What does a London quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Which rules do FD90 and FD120 fire doors in London need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Neighbouring areas
- Westminster (1 mile)
- Pimlico (1 mile)
- Islington (2 miles)
- Camden Town (2 miles)
- Chelsea (2 miles)
- Chalk Farm (2 miles)
Also available in London
- Acoustic Fire Doors in London
- Fire Door Ironmongery & Closers in London
- Fire Exit Doors in London
- HMO Fire Doors in London
- Fire-Rated Screens & Fanlights in London
- Stairwell & Escape Route Doors in London
- Communal & Corridor Fire Doors in London
- Security Fire Doors in London
- FD90 & FD120 Doorsets across Greater London
- All fire doors in London