Certified FD90 and FD120 fire doors for Barrow-in-Furness
Looking for FD90 and FD120 fire doors in Barrow-in-Furness? Our supply and fit service covers LA14 and the surrounding area, including Morecambe and Fleetwood. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Barrow-in-Furness is about 55 miles from Carlisle; we cover both, along with Morecambe, Fleetwood and Lancaster.
Which rules apply in Barrow-in-Furness?
Fire doors in Barrow-in-Furness sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD90 and FD120 fire doors in Cumbria
Guide prices for FD90 and FD120 fire doors in Barrow-in-Furness run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Buildings that need FD90 and FD120 fire doors
Typical uses for FD90 and FD120 fire doors in Barrow-in-Furness include high fire-load stores and generator rooms.
Cumbria has hotels and guest houses across the Lake District alongside town-centre flats and industrial sites in Carlisle and the west coast towns.
- High fire-load stores
- Generator rooms
- Separating walls with long ratings
- Transformer and switch rooms
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Barrow-in-Furness
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD90 and FD120 fire doors in Barrow-in-Furness
How quickly can you survey in Barrow-in-Furness?
We arrange surveys around your access needs and, where possible, combine Barrow-in-Furness visits with other work in Cumbria. Tell us your preferred dates when you enquire.
What does a Barrow-in-Furness quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Will I get certificates for the doors fitted in Barrow-in-Furness?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
Neighbouring areas
- Morecambe (15 miles)
- Fleetwood (16 miles)
- Lancaster (18 miles)
- Thornton-Cleveleys (19 miles)
- Blackpool (22 miles)
- Kendal (24 miles)
Also available in Barrow-in-Furness
- Fire-Rated Screens & Fanlights in Barrow-in-Furness
- FD60 Fire Doorsets in Barrow-in-Furness
- Double & Leaf-and-a-Half Fire Doors in Barrow-in-Furness
- Fire Door Replacement in Barrow-in-Furness
- FD30S Smoke Control Doorsets in Barrow-in-Furness
- Communal & Corridor Fire Doors in Barrow-in-Furness
- Flat Entrance Fire Doors in Barrow-in-Furness
- Acoustic Fire Doors in Barrow-in-Furness
- FD90 & FD120 Doorsets across Cumbria
- All fire doors in Barrow-in-Furness