Our Cumbria supply and fit service
We supply and fit FD60 fire doors across Cumbria, including Carlisle, Barrow-in-Furness and Kendal. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.
Fire door rules in Cumbria
In Cumbria, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
FD60 fire doors prices in Cumbria
Guide prices for FD60 fire doors in Cumbria run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Where FD60 fire doors are used in Cumbria
Cumbria has hotels and guest houses across the Lake District alongside town-centre flats and industrial sites in Carlisle and the west coast towns.
- Compartment walls
- Stair cores in taller blocks
- Plant and boiler rooms
- Higher-risk stores
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Tell us about the doors — photos help
- Free measure survey at your Cumbria property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in Cumbria
Can you fit just one door?
Yes — from a single door to a full building.
Will I get certificates for the doors fitted?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Towns in Cumbria we cover for FD60 fire doors
FD60 Fire Doorsets in neighbouring areas
Other fire doors in Cumbria
- FD30 Fire Doorsets in Cumbria
- FD30S Smoke Control Doorsets in Cumbria
- FD90 & FD120 Doorsets in Cumbria
- Flat Entrance Fire Doors in Cumbria
- Communal & Corridor Fire Doors in Cumbria
- Stairwell & Escape Route Doors in Cumbria
- HMO Fire Doors in Cumbria
- Fire Doors for Homes in Cumbria
- Riser & Service Cupboard Doors in Cumbria
- Commercial & Office Fire Doors in Cumbria
- School & Healthcare Fire Doors in Cumbria
- Timber Fire Doorsets in Cumbria
- Composite Fire Doors in Cumbria
- Steel Fire Doors in Cumbria
- Glazed Fire Doors in Cumbria
- Double & Leaf-and-a-Half Fire Doors in Cumbria
- Fire-Rated Screens & Fanlights in Cumbria
- Acoustic Fire Doors in Cumbria
- Security Fire Doors in Cumbria
- Fire Exit Doors in Cumbria
- Fire Door Ironmongery & Closers in Cumbria
- Fire Door Replacement in Cumbria
- Fire Door Supply & Fit in Cumbria
- All fire doors in Cumbria