FD60 fire doors in Harlow: how we work
We fit FD60 doorsets for compartment walls, cores and plant rooms in Harlow and the rest of Essex. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Our Essex coverage includes Harlow and its neighbours Hoddesdon, Bishop's Stortford and Waltham Abbey; tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for FD60 fire doors in Essex
New and replacement fire doors in Harlow are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
FD60 fire doors prices in Harlow
Guide prices for FD60 fire doors in Harlow run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD60 fire doors are needed
In Harlow, FD60 fire doors are typically needed in higher-risk stores and compartment walls.
Essex covers commuter towns, new estates and large town-centre flat developments, from Southend and Basildon to Chelmsford and Colchester.
- Higher-risk stores
- Compartment walls
- Plant and boiler rooms
- Stair cores in taller blocks
What's in the doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD60 fire doors in Harlow: questions
Is the survey in Harlow free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you cover Harlow?
Yes. We survey, supply and fit FD60 fire doors throughout Harlow and the rest of Essex, including CM20 and nearby Hoddesdon.
Will I get certificates for the doors fitted in Harlow?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Also covering towns near Harlow
- Hoddesdon (6 miles)
- Bishop's Stortford (7 miles)
- Waltham Abbey (8 miles)
- Cheshunt (8 miles)
- Hertford (8 miles)
- Chingford (11 miles)
Other fire doors in Harlow
- Composite Fire Doors in Harlow
- Fire Door Ironmongery & Closers in Harlow
- Communal & Corridor Fire Doors in Harlow
- Fire Door Supply & Fit in Harlow
- HMO Fire Doors in Harlow
- Steel Fire Doors in Harlow
- Glazed Fire Doors in Harlow
- Fire-Rated Screens & Fanlights in Harlow
- FD60 Fire Doorsets across Essex
- All fire doors in Harlow