Certified FD90 and FD120 fire doors for Eltham
If your fire risk assessment in Eltham has flagged doors to replace, we can schedule, quote and fit FD90 and FD120 steel doorsets for plant and high-risk rooms to match its recommendations. Surveys in SE9 are free and quotes are fixed and itemised.
Whether your building is in central Eltham or on its edges towards Blackheath, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Fire door rules in Eltham
Because Eltham is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
FD90 and FD120 fire doors prices in Eltham
Guide prices for FD90 and FD120 fire doors in Eltham run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Eltham
Wherever they are in Eltham, FD90 and FD120 fire doors are most often specified for separating walls with long ratings and generator rooms.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Separating walls with long ratings
- Generator rooms
- High fire-load stores
- Transformer and switch rooms
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Tell us about the doors — photos help
- Free measure survey at your Eltham property
- Door-by-door schedule and fixed price
- Installation and handover pack
FD90 and FD120 fire doors in Eltham: questions
Can you fit just one door in Eltham?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Which rules do FD90 and FD120 fire doors in Eltham need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can you work around tenants or staff in Eltham?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
FD90 & FD120 Doorsets near Eltham
- Blackheath (2 miles)
- Welling (2 miles)
- Catford (3 miles)
- Greenwich (3 miles)
- Bexley (4 miles)
- Beckenham (4 miles)
Also available in Eltham
- Security Fire Doors in Eltham
- Steel Fire Doors in Eltham
- Stairwell & Escape Route Doors in Eltham
- School & Healthcare Fire Doors in Eltham
- Fire Doors for Homes in Eltham
- Fire Door Ironmongery & Closers in Eltham
- Riser & Service Cupboard Doors in Eltham
- Fire Door Supply & Fit in Eltham
- FD90 & FD120 Doorsets across Greater London
- All fire doors in Eltham