Our Chelsea supply and fit service
Looking for FD30S fire doors in Chelsea? Our supply and fit service covers SW3 and the surrounding area, including Battersea and Fulham. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Chelsea is about 2 miles from London. Wherever your building is in SW3, we arrange survey and fitting dates around access and occupancy.
What the law says in Chelsea
In Chelsea, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
FD30S fire doors prices in Chelsea
Our guide for FD30S fire doors is £800–£1,250 per single doorset fitted, ex VAT. Quotes for Chelsea are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need FD30S fire doors
Protected stairways and lobby doors in blocks of flats are among the most common settings for FD30S fire doors, in Chelsea as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Protected stairways
- Lobby doors in blocks of flats
- Cross-corridor doors
- Integral garage doors
What's in the doorset
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about FD30S fire doors in Chelsea
Can you fit just one door in Chelsea?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Can you work around tenants or staff in Chelsea?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Will I get certificates for the doors fitted in Chelsea?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do smoke seals stop the door closing?
They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.
Also covering towns near Chelsea
- Battersea (1 mile)
- Fulham (1 mile)
- Pimlico (1 mile)
- Westminster (2 miles)
- Notting Hill (2 miles)
- London (2 miles)
Also available in Chelsea
- Fire-Rated Screens & Fanlights in Chelsea
- Fire Exit Doors in Chelsea
- Steel Fire Doors in Chelsea
- Fire Door Replacement in Chelsea
- Timber Fire Doorsets in Chelsea
- Commercial & Office Fire Doors in Chelsea
- Fire Doors for Homes in Chelsea
- Communal & Corridor Fire Doors in Chelsea
- FD30S Smoke Control Doorsets across Greater London
- All fire doors in Chelsea