Our Cirencester supply and fit service
Need FD60 fire doors in Cirencester? We supply and fit complete certified doorsets across Gloucestershire, starting with a free measure survey in and around GL7. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
We cover GL7 and the surrounding area, including Stroud. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Cirencester?
Fire doors in Cirencester sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD60 fire doors in Gloucestershire
Budget around £1,050 to £1,650 per single doorset for FD60 fire doors supplied and fitted in Cirencester, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Typical uses in Cirencester
Typical uses for FD60 fire doors in Cirencester include stair cores in taller blocks and plant and boiler rooms.
Gloucestershire mixes Cheltenham's Regency conversions and offices with Gloucester's regenerated docks and the Bristol fringe around Kingswood.
- Stair cores in taller blocks
- Plant and boiler rooms
- Compartment walls
- Higher-risk stores
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Tell us about the doors — photos help
- Free measure survey at your Cirencester property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in Gloucestershire
Can you fit just one door in Cirencester?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Gloucestershire.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Cirencester.
Which rules do FD60 fire doors in Cirencester need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Also covering towns near Cirencester
- Stroud (10 miles)
- Cheltenham (13 miles)
- Swindon (14 miles)
- Gloucester (16 miles)
- Chippenham (19 miles)
- Tewkesbury (20 miles)
Other products in Cirencester
- Communal & Corridor Fire Doors in Cirencester
- Flat Entrance Fire Doors in Cirencester
- Fire Door Supply & Fit in Cirencester
- Timber Fire Doorsets in Cirencester
- Fire Exit Doors in Cirencester
- Double & Leaf-and-a-Half Fire Doors in Cirencester
- Fire Doors for Homes in Cirencester
- HMO Fire Doors in Cirencester
- FD60 Fire Doorsets across Gloucestershire
- All fire doors in Cirencester