Certified FD60 fire doors for Stroud
Looking for FD60 fire doors in Stroud? Our supply and fit service covers GL6 and the surrounding area, including Gloucester and Cirencester. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Stroud is about 8 miles from Gloucester; we cover both, along with Gloucester, Cirencester and Cheltenham.
Regulations for FD60 fire doors in Gloucestershire
Because Stroud is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
FD60 fire doors prices in Stroud
Budget around £1,050 to £1,650 per single doorset for FD60 fire doors supplied and fitted in Stroud, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Typical uses in Stroud
Typical uses for FD60 fire doors in Stroud include higher-risk stores and plant and boiler rooms.
Gloucestershire mixes Cheltenham's Regency conversions and offices with Gloucester's regenerated docks and the Bristol fringe around Kingswood.
- Higher-risk stores
- Plant and boiler rooms
- Compartment walls
- Stair cores in taller blocks
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD60 fire doors in Stroud: questions
Do you cover Stroud?
Yes. We survey, supply and fit FD60 fire doors throughout Stroud and the rest of Gloucestershire, including GL6 and nearby Gloucester.
Can you work around tenants or staff in Stroud?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
What does a Stroud quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Nearby towns we cover
- Gloucester (8 miles)
- Cirencester (10 miles)
- Cheltenham (12 miles)
- Tewkesbury (17 miles)
- Yate (17 miles)
- Chippenham (20 miles)
More doorsets for Stroud
- Glazed Fire Doors in Stroud
- Riser & Service Cupboard Doors in Stroud
- Stairwell & Escape Route Doors in Stroud
- FD30 Fire Doorsets in Stroud
- Fire Exit Doors in Stroud
- Acoustic Fire Doors in Stroud
- Fire-Rated Screens & Fanlights in Stroud
- Steel Fire Doors in Stroud
- FD60 Fire Doorsets across Gloucestershire
- All fire doors in Stroud