FD60 fire doors in Kingswood | Supplied & Fitted

FD60 Fire Doorsets for Kingswood buildings

Looking for FD60 fire doors in Kingswood? Our supply and fit service covers BS15 and the surrounding area, including Mangotsfield and Bristol. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.

Kingswood is about 30 miles from Gloucester; we cover both, along with Mangotsfield, Bristol and Yate.

What the law says in Kingswood

Fire doors in Kingswood sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.

Cost of FD60 fire doors in Gloucestershire

Our guide price for FD60 fire doors in Kingswood is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.

Buildings that need FD60 fire doors

In Kingswood, FD60 fire doors are typically needed in plant and boiler rooms and higher-risk stores.

Gloucestershire mixes Cheltenham's Regency conversions and offices with Gloucester's regenerated docks and the Bristol fringe around Kingswood.

Plant and boiler rooms
Higher-risk stores
Stair cores in taller blocks
Compartment walls

What you get with each doorset

Fire resistance	60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf	54mm timber or steel
Smoke control	FD60S available with tested smoke seals
Typical use	Compartment walls, firefighting shafts, plant rooms
Hinges	Usually four hinges on timber leaves, per test evidence

See the full specification and options for FD60 Fire Doorsets

Four steps to compliant doors

Share your FRA or inspection findings
We confirm every door on site
Fixed quote, certified doorsets only
Fitted to the manufacturer's instructions, with photos

Questions about FD60 fire doors in Kingswood

Do you cover Kingswood?

Yes. We survey, supply and fit FD60 fire doors throughout Kingswood and the rest of Gloucestershire, including BS15 and nearby Mangotsfield.

Can you work around tenants or staff in Kingswood?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Which rules do FD60 fire doors in Kingswood need to meet?

They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Can I use an FD60 door where FD30 is required?

Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.

FD60 Fire Doorsets in Kingswood