Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in Gloucestershire

We supply and fit FD30S fire doors throughout Gloucestershire, including Gloucester, Cheltenham and Stroud, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £800 per single doorset in Gloucestershire, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

Getting FD30S fire doors fitted in Gloucestershire

We supply and fit FD30S fire doors across Gloucestershire, including Gloucester, Cheltenham and Stroud. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.

Fire door rules in Gloucestershire

Fire doors in Gloucestershire sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.

Cost of FD30S fire doors in Gloucestershire

Budget around £800 to £1,250 per single doorset for FD30S fire doors supplied and fitted in Gloucestershire, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.

The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.

Where FD30S fire doors are used in Gloucestershire

Gloucestershire mixes Cheltenham's Regency conversions and offices with Gloucester's regenerated docks and the Bristol fringe around Kingswood.

  • Protected stairways
  • Cross-corridor doors
  • Integral garage doors
  • Lobby doors in blocks of flats

Doorset specification

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

What happens next

  1. Request a quote online or call
  2. Survey: sizes, ratings, hardware and condition
  3. Quote with each doorset's certification
  4. Phased fitting and handover records

FD30S fire doors in Gloucestershire: questions

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Which rules apply in Gloucestershire?

Doors are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset.

Do smoke seals stop the door closing?

They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.

Towns in Gloucestershire we cover for FD30S fire doors

FD30S Smoke Control Doorsets in neighbouring areas

Other fire doors in Gloucestershire

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.