Certified FD30S fire doors for Cannock
For landlords, managing agents, businesses and homeowners in Cannock, we provide FD30S smoke control doorsets for flats, stairs and corridors with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
We cover WS11 and the surrounding area, including Burntwood. Tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Cannock
In Cannock, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
FD30S fire doors prices in Cannock
Our guide for FD30S fire doors is £800–£1,250 per single doorset fitted, ex VAT. Quotes for Cannock are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD30S fire doors are needed
In Cannock, FD30S fire doors are typically needed in lobby doors in blocks of flats and protected stairways.
Staffordshire combines the Potteries' industrial buildings with Stafford, Burton and Tamworth's logistics, schools and town centres.
- Lobby doors in blocks of flats
- Protected stairways
- Integral garage doors
- Cross-corridor doors
Doorset specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Staffordshire
Can you fit just one door in Cannock?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Staffordshire.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Cannock.
Do you cover Cannock?
Yes. We survey, supply and fit FD30S fire doors throughout Cannock and the rest of Staffordshire, including WS11 and nearby Burntwood.
What is the difference between FD30 and FD30S?
Both resist fire for 30 minutes. FD30S also has tested smoke seals that limit cold smoke passing around the leaf before the intumescent strip activates.
Nearby towns we cover
- Burntwood (4 miles)
- Bloxwich (5 miles)
- Rugeley (6 miles)
- Wednesfield (7 miles)
- Willenhall (7 miles)
- Walsall (7 miles)
Also available in Cannock
- FD30 Fire Doorsets in Cannock
- Steel Fire Doors in Cannock
- Fire Door Replacement in Cannock
- Fire Exit Doors in Cannock
- Fire Door Ironmongery & Closers in Cannock
- Fire Door Supply & Fit in Cannock
- HMO Fire Doors in Cannock
- Communal & Corridor Fire Doors in Cannock
- FD30S Smoke Control Doorsets across Staffordshire
- All fire doors in Cannock