Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in Congleton

We supply and fit FD30S fire doors in Congleton (CW12) as complete certified doorsets — with a free measure survey, a fixed itemised quote listing every certificate reference, and installation exactly as tested.

From £800 per single doorset in Congleton, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

FD30S Smoke Control Doorsets for Congleton buildings

Fire Rated Doors supplies and fits FD30S fire doors in Congleton, Cheshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.

Whether your building is in central Congleton or on its edges towards Kidsgrove, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.

Which rules apply in Congleton?

Because Congleton is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.

FD30S fire doors prices in Congleton

Expect roughly £800–£1,250 per single doorset for FD30S fire doors, fitted, ex VAT. Your Congleton quote is fixed after survey and itemised door by door.

If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.

Typical uses in Congleton

Lobby doors in blocks of flats and protected stairways are among the most common settings for FD30S fire doors, in Congleton as elsewhere.

Cheshire spans Warrington's warehouses and offices, Chester's historic centre and the new-build estates around Crewe.

  • Lobby doors in blocks of flats
  • Protected stairways
  • Integral garage doors
  • Cross-corridor doors

Doorset specification

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

Four steps to compliant doors

  1. Share your FRA or inspection findings
  2. We confirm every door on site
  3. Fixed quote, certified doorsets only
  4. Fitted to the manufacturer's instructions, with photos

FD30S fire doors in Congleton: questions

Will I get certificates for the doors fitted in Congleton?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Is the survey in Congleton free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Congleton.

Which doors in a block of flats need FD30S?

Typically flat entrance doors and doors onto protected stairs and lobbies. The building's fire strategy is the final word.

Also covering towns near Congleton

Also available in Congleton

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.