Certified FD30 fire doors for Middlesbrough
Fire Rated Doors supplies and fits FD30 fire doors in Middlesbrough, North Yorkshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Whether your building is in central Middlesbrough or on its edges towards Billingham, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
What the law says in Middlesbrough
New and replacement fire doors in Middlesbrough are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Middlesbrough
Expect roughly £750–£1,150 per single doorset for FD30 fire doors, fitted, ex VAT. Your Middlesbrough quote is fixed after survey and itemised door by door.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where FD30 fire doors are used in Middlesbrough
Wherever they are in Middlesbrough, FD30 fire doors are most often specified for HMO bedrooms and kitchens and plant rooms and stores.
North Yorkshire runs from York's historic centre and student housing to Teesside's industry and Harrogate and Scarborough's hotels.
- HMO bedrooms and kitchens
- Plant rooms and stores
- Hotel corridors
- Offices and retail back-of-house
Doorset specification
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in North Yorkshire
Will I get certificates for the doors fitted in Middlesbrough?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Middlesbrough.
Can you fit just one door in Middlesbrough?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in North Yorkshire.
Can I fit an FD30 door into my existing frame?
Only if the manufacturer's evidence allows that frame, which is rare. We normally supply the complete doorset with a new frame so the certification carries through to the finished job.
Also covering towns near Middlesbrough
- Billingham (2 miles)
- Stockton-on-Tees (3 miles)
- Thornaby-on-Tees (4 miles)
- Redcar (7 miles)
- Hartlepool (7 miles)
- Darlington (13 miles)
Also available in Middlesbrough
- Riser & Service Cupboard Doors in Middlesbrough
- Fire-Rated Screens & Fanlights in Middlesbrough
- Stairwell & Escape Route Doors in Middlesbrough
- Acoustic Fire Doors in Middlesbrough
- School & Healthcare Fire Doors in Middlesbrough
- Communal & Corridor Fire Doors in Middlesbrough
- Double & Leaf-and-a-Half Fire Doors in Middlesbrough
- FD90 & FD120 Doorsets in Middlesbrough
- FD30 Fire Doorsets across North Yorkshire
- All fire doors in Middlesbrough