Certified fire door closers and ironmongery for Wallsend
If your fire risk assessment in Wallsend has flagged doors to replace, we can schedule, quote and fit fire door closers, hinges and hold-open devices to match its recommendations. Surveys in NE28 are free and quotes are fixed and itemised.
Wallsend is about 3 miles from Newcastle upon Tyne; we cover both, along with Hebburn, Jarrow and Felling.
Regulations for fire door closers and ironmongery in Tyne and Wear
Fire doors in Wallsend sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do fire door closers and ironmongery cost in Wallsend?
Guide prices for fire door closers and ironmongery in Wallsend run from about £120 to £500 per item, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Where fire door closers and ironmongery are used in Wallsend
In Wallsend, fire door closers and ironmongery are typically needed in access control preparation and failed closers and hinges.
Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.
- Access control preparation
- Failed closers and hinges
- Busy corridors needing hold-open
- Seal and signage replacement
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about fire door closers and ironmongery in Wallsend
Do you work for landlords and managing agents in Wallsend?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Can you work around tenants or staff in Wallsend?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you cover Wallsend?
Yes. We survey, supply and fit fire door closers and ironmongery throughout Wallsend and the rest of Tyne and Wear, including NE28 and nearby Hebburn.
How many hinges does a fire door need?
Most timber fire doors need three hinges; heavier FD60 leaves often need four. The evidence decides.
Also covering towns near Wallsend
- Hebburn (1 mile)
- Jarrow (2 miles)
- Felling (3 miles)
- Gosforth (3 miles)
- Gateshead (3 miles)
- Newcastle upon Tyne (3 miles)
Also available in Wallsend
- FD90 & FD120 Doorsets in Wallsend
- Riser & Service Cupboard Doors in Wallsend
- Fire Door Supply & Fit in Wallsend
- Communal & Corridor Fire Doors in Wallsend
- Steel Fire Doors in Wallsend
- Composite Fire Doors in Wallsend
- HMO Fire Doors in Wallsend
- Stairwell & Escape Route Doors in Wallsend
- Fire Door Ironmongery & Closers across Tyne and Wear
- All fire doors in Wallsend