Our Gosforth supply and fit service
If your fire risk assessment in Gosforth has flagged doors to replace, we can schedule, quote and fit fire door closers, hinges and hold-open devices to match its recommendations. Surveys in NE3 are free and quotes are fixed and itemised.
Where possible we combine Gosforth surveys with other visits in Tyne and Wear, such as Newcastle upon Tyne and Gateshead, which helps keep survey dates flexible.
Which rules apply in Gosforth?
New and replacement fire doors in Gosforth are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do fire door closers and ironmongery cost in Gosforth?
Our guide price for fire door closers and ironmongery in Gosforth is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need fire door closers and ironmongery
In Gosforth, fire door closers and ironmongery are typically needed in access control preparation and seal and signage replacement.
Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.
- Access control preparation
- Seal and signage replacement
- Busy corridors needing hold-open
- Failed closers and hinges
What you get with each doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
How it works in Gosforth
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Fire door closers and ironmongery in Gosforth: questions
Is the survey in Gosforth free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Gosforth.
What does a Gosforth quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can I use any hinge on a fire door?
No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.
Neighbouring areas
- Newcastle upon Tyne (2 miles)
- Gateshead (2 miles)
- Wallsend (3 miles)
- Felling (4 miles)
- Hebburn (4 miles)
- Newburn (5 miles)
More doorsets for Gosforth
- FD30 Fire Doorsets in Gosforth
- Riser & Service Cupboard Doors in Gosforth
- Flat Entrance Fire Doors in Gosforth
- Acoustic Fire Doors in Gosforth
- Fire Exit Doors in Gosforth
- Communal & Corridor Fire Doors in Gosforth
- Fire Doors for Homes in Gosforth
- Glazed Fire Doors in Gosforth
- Fire Door Ironmongery & Closers across Tyne and Wear
- All fire doors in Gosforth