Getting steel fire doors fitted in Wallsend
Getting steel fire doors right in Wallsend means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Our Tyne and Wear coverage includes Wallsend and its neighbours Hebburn, Jarrow and Felling; tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for steel fire doors in Tyne and Wear
Fire doors in Wallsend sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do steel fire doors cost in Wallsend?
Our guide price for steel fire doors in Wallsend is £1,100 to £2,600 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where steel fire doors are needed
Typical uses for steel fire doors in Wallsend include warehouses and industrial units and plant and switch rooms.
Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.
- Warehouses and industrial units
- Plant and switch rooms
- Car parks and bin stores
- Retail back-of-house
Steel Fire Doors: key specification
| Ratings | FD30 to FD240 depending on system |
|---|---|
| Construction | Galvanised steel leaf and frame, insulated core |
| Finish | Polyester powder coat in RAL colours |
| Options | Vision panels, louvres (non-fire), panic hardware, security locking |
| Typical use | Plant rooms, warehouses, retail back-of-house, car parks |
See the full specification and options for Steel Fire Doors
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Steel fire doors in Wallsend: questions
Is the survey in Wallsend free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Wallsend.
What does a Wallsend quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can steel fire doors be painted?
They are factory powder-coated. Site painting is possible but must not cover seals.
Also covering towns near Wallsend
- Hebburn (1 mile)
- Jarrow (2 miles)
- Felling (3 miles)
- Gosforth (3 miles)
- Gateshead (3 miles)
- Newcastle upon Tyne (3 miles)
Other fire doors in Wallsend
- Communal & Corridor Fire Doors in Wallsend
- Commercial & Office Fire Doors in Wallsend
- HMO Fire Doors in Wallsend
- Composite Fire Doors in Wallsend
- Fire Doors for Homes in Wallsend
- Stairwell & Escape Route Doors in Wallsend
- FD30 Fire Doorsets in Wallsend
- Riser & Service Cupboard Doors in Wallsend
- Steel Fire Doors across Tyne and Wear
- All fire doors in Wallsend
