Certified fire door closers and ironmongery for Hebburn
Fire Rated Doors supplies and fits fire door closers and ironmongery in Hebburn, Tyne and Wear. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Whether your building is in central Hebburn or on its edges towards Jarrow, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Regulations for fire door closers and ironmongery in Tyne and Wear
Because Hebburn is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of fire door closers and ironmongery in Tyne and Wear
Our guide for fire door closers and ironmongery is £120–£500 per item fitted, ex VAT. Quotes for Hebburn are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where fire door closers and ironmongery are used in Hebburn
Typical uses for fire door closers and ironmongery in Hebburn include seal and signage replacement and failed closers and hinges.
Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.
- Seal and signage replacement
- Failed closers and hinges
- Busy corridors needing hold-open
- Access control preparation
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Fire door closers and ironmongery in Hebburn: questions
Will I get certificates for the doors fitted in Hebburn?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
How quickly can you survey in Hebburn?
We arrange surveys around your access needs and, where possible, combine Hebburn visits with other work in Tyne and Wear. Tell us your preferred dates when you enquire.
Which rules do fire door closers and ironmongery in Hebburn need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can I use any hinge on a fire door?
No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.
Neighbouring areas
- Jarrow (1 mile)
- Wallsend (1 mile)
- Felling (2 miles)
- Gateshead (4 miles)
- South Shields (4 miles)
- Newcastle upon Tyne (4 miles)
More doorsets for Hebburn
- Steel Fire Doors in Hebburn
- Stairwell & Escape Route Doors in Hebburn
- HMO Fire Doors in Hebburn
- Composite Fire Doors in Hebburn
- Double & Leaf-and-a-Half Fire Doors in Hebburn
- Timber Fire Doorsets in Hebburn
- Glazed Fire Doors in Hebburn
- Acoustic Fire Doors in Hebburn
- Fire Door Ironmongery & Closers across Tyne and Wear
- All fire doors in Hebburn