Our Newcastle upon Tyne supply and fit service
We fit fire door closers, hinges and hold-open devices in Newcastle upon Tyne and the rest of Tyne and Wear. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Surveys in Newcastle upon Tyne are booked around your access needs, and we cover the wider Tyne and Wear area too.
Regulations for fire door closers and ironmongery in Tyne and Wear
In Newcastle upon Tyne, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Fire door closers and ironmongery prices in Newcastle upon Tyne
Our guide for fire door closers and ironmongery is £120–£500 per item fitted, ex VAT. Quotes for Newcastle upon Tyne are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need fire door closers and ironmongery
Access control preparation and seal and signage replacement are among the most common settings for fire door closers and ironmongery, in Newcastle upon Tyne as elsewhere.
Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.
- Access control preparation
- Seal and signage replacement
- Busy corridors needing hold-open
- Failed closers and hinges
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Your questions answered
Can you work around tenants or staff in Newcastle upon Tyne?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
What does a Newcastle upon Tyne quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Which rules do fire door closers and ironmongery in Newcastle upon Tyne need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you install hold-open devices?
We fit the devices; connection to the fire alarm panel is done by your alarm engineer, whom we coordinate with.
Neighbouring areas
- Gateshead (1 mile)
- Gosforth (2 miles)
- Felling (2 miles)
- Wallsend (3 miles)
- Hebburn (4 miles)
- Jarrow (5 miles)
Also available in Newcastle upon Tyne
- FD30S Smoke Control Doorsets in Newcastle upon Tyne
- Fire Door Supply & Fit in Newcastle upon Tyne
- School & Healthcare Fire Doors in Newcastle upon Tyne
- Acoustic Fire Doors in Newcastle upon Tyne
- Fire-Rated Screens & Fanlights in Newcastle upon Tyne
- FD30 Fire Doorsets in Newcastle upon Tyne
- Glazed Fire Doors in Newcastle upon Tyne
- Double & Leaf-and-a-Half Fire Doors in Newcastle upon Tyne
- Fire Door Ironmongery & Closers across Tyne and Wear
- All fire doors in Newcastle upon Tyne