Fire Door Ironmongery & Closers for Gateshead buildings
Fire Rated Doors supplies and fits fire door closers and ironmongery in Gateshead, Tyne and Wear. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
We cover NE8 and the surrounding area, including Newcastle upon Tyne. Tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Gateshead
Because Gateshead is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do fire door closers and ironmongery cost in Gateshead?
Expect roughly £120–£500 per item for fire door closers and ironmongery, fitted, ex VAT. Your Gateshead quote is fixed after survey and itemised door by door.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Buildings that need fire door closers and ironmongery
Failed closers and hinges and seal and signage replacement are among the most common settings for fire door closers and ironmongery, in Gateshead as elsewhere.
Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.
- Failed closers and hinges
- Seal and signage replacement
- Busy corridors needing hold-open
- Access control preparation
Fire Door Ironmongery & Closers: key specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
What happens next
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
Can you work around tenants or staff in Gateshead?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Is the survey in Gateshead free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you cover Gateshead?
Yes. We survey, supply and fit fire door closers and ironmongery throughout Gateshead and the rest of Tyne and Wear, including NE8 and nearby Newcastle upon Tyne.
How many hinges does a fire door need?
Most timber fire doors need three hinges; heavier FD60 leaves often need four. The evidence decides.
Also covering towns near Gateshead
- Newcastle upon Tyne (1 mile)
- Felling (1 mile)
- Gosforth (2 miles)
- Wallsend (3 miles)
- Hebburn (4 miles)
- Jarrow (5 miles)
Also available in Gateshead
- Timber Fire Doorsets in Gateshead
- Commercial & Office Fire Doors in Gateshead
- Security Fire Doors in Gateshead
- Fire Door Replacement in Gateshead
- FD30 Fire Doorsets in Gateshead
- Steel Fire Doors in Gateshead
- Communal & Corridor Fire Doors in Gateshead
- Fire Exit Doors in Gateshead
- Fire Door Ironmongery & Closers across Tyne and Wear
- All fire doors in Gateshead