Certified fire door closers and ironmongery for Bury
Fire Rated Doors supplies and fits fire door closers and ironmongery in Bury, Greater Manchester. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Our Greater Manchester coverage includes Bury and its neighbours Radcliffe, Heywood and Whitefield; tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Bury
Fire doors in Bury sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of fire door closers and ironmongery in Greater Manchester
Budget around £120 to £500 per item for fire door closers and ironmongery supplied and fitted in Bury, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where fire door closers and ironmongery are used in Bury
In Bury, fire door closers and ironmongery are typically needed in busy corridors needing hold-open and failed closers and hinges.
Greater Manchester combines city-centre apartment towers in Manchester and Salford with converted mills, large post-war estates and busy town centres across the boroughs.
- Busy corridors needing hold-open
- Failed closers and hinges
- Seal and signage replacement
- Access control preparation
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Fire door closers and ironmongery in Bury: questions
Will I get certificates for the doors fitted in Bury?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Which rules do fire door closers and ironmongery in Bury need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can you work around tenants or staff in Bury?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How many hinges does a fire door need?
Most timber fire doors need three hinges; heavier FD60 leaves often need four. The evidence decides.
Neighbouring areas
- Radcliffe (3 miles)
- Heywood (3 miles)
- Whitefield (4 miles)
- Prestwich (4 miles)
- Middleton (6 miles)
- Farnworth (6 miles)
More doorsets for Bury
- Fire Door Replacement in Bury
- Stairwell & Escape Route Doors in Bury
- Commercial & Office Fire Doors in Bury
- Double & Leaf-and-a-Half Fire Doors in Bury
- Composite Fire Doors in Bury
- Glazed Fire Doors in Bury
- FD60 Fire Doorsets in Bury
- Communal & Corridor Fire Doors in Bury
- Fire Door Ironmongery & Closers across Greater Manchester
- All fire doors in Bury