Fire Door Ironmongery & Closers for Tyldesley buildings
Getting fire door closers and ironmongery right in Tyldesley means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Where possible we combine Tyldesley surveys with other visits in Greater Manchester, such as Atherton and Leigh, which helps keep survey dates flexible.
Fire door rules in Tyldesley
Fire doors in Tyldesley sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Guide prices in Tyldesley
Our guide for fire door closers and ironmongery is £120–£500 per item fitted, ex VAT. Quotes for Tyldesley are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where fire door closers and ironmongery are needed
Access control preparation and busy corridors needing hold-open are among the most common settings for fire door closers and ironmongery, in Tyldesley as elsewhere.
Greater Manchester combines city-centre apartment towers in Manchester and Salford with converted mills, large post-war estates and busy town centres across the boroughs.
- Access control preparation
- Busy corridors needing hold-open
- Seal and signage replacement
- Failed closers and hinges
What you get with each doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
How it works in Tyldesley
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Fire door closers and ironmongery in Tyldesley: questions
Can you fit just one door in Tyldesley?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater Manchester.
Which rules do fire door closers and ironmongery in Tyldesley need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Will I get certificates for the doors fitted in Tyldesley?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you install hold-open devices?
We fit the devices; connection to the fire alarm panel is done by your alarm engineer, whom we coordinate with.
Also covering towns near Tyldesley
- Atherton (1 mile)
- Leigh (2 miles)
- Walkden (2 miles)
- Westhoughton (3 miles)
- Farnworth (4 miles)
- Swinton (5 miles)
More doorsets for Tyldesley
- FD30S Smoke Control Doorsets in Tyldesley
- Fire Exit Doors in Tyldesley
- FD30 Fire Doorsets in Tyldesley
- Fire Doors for Homes in Tyldesley
- School & Healthcare Fire Doors in Tyldesley
- Double & Leaf-and-a-Half Fire Doors in Tyldesley
- FD90 & FD120 Doorsets in Tyldesley
- Security Fire Doors in Tyldesley
- Fire Door Ironmongery & Closers across Greater Manchester
- All fire doors in Tyldesley