Fire door closers and ironmongery in Salford: how we work
Need fire door closers and ironmongery in Salford? We supply and fit complete certified doorsets across Greater Manchester, starting with a free measure survey in and around M6. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Our Greater Manchester coverage includes Salford and its neighbours Eccles, Old Trafford and Manchester; tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Salford
Fire doors in Salford sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do fire door closers and ironmongery cost in Salford?
Expect roughly £120–£500 per item for fire door closers and ironmongery, fitted, ex VAT. Your Salford quote is fixed after survey and itemised door by door.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Buildings that need fire door closers and ironmongery
In Salford, fire door closers and ironmongery are typically needed in failed closers and hinges and access control preparation.
Greater Manchester combines city-centre apartment towers in Manchester and Salford with converted mills, large post-war estates and busy town centres across the boroughs.
- Failed closers and hinges
- Access control preparation
- Seal and signage replacement
- Busy corridors needing hold-open
Doorset specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Fire door closers and ironmongery in Salford: questions
Which rules do fire door closers and ironmongery in Salford need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can you fit just one door in Salford?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater Manchester.
Will I get certificates for the doors fitted in Salford?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can I use any hinge on a fire door?
No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.
Neighbouring areas
- Eccles (2 miles)
- Old Trafford (2 miles)
- Manchester (2 miles)
- Swinton (2 miles)
- Stretford (3 miles)
- Prestwich (3 miles)
More doorsets for Salford
- Fire-Rated Screens & Fanlights in Salford
- Fire Door Supply & Fit in Salford
- Stairwell & Escape Route Doors in Salford
- Steel Fire Doors in Salford
- FD30S Smoke Control Doorsets in Salford
- Double & Leaf-and-a-Half Fire Doors in Salford
- Fire Exit Doors in Salford
- Flat Entrance Fire Doors in Salford
- Fire Door Ironmongery & Closers across Greater Manchester
- All fire doors in Salford