FD90 & FD120 Doorsets for Renfrewshire & Inverclyde buildings
Across Renfrewshire & Inverclyde we handle FD90 and FD120 fire doors for single doors and whole-building programmes alike — survey, fixed quote, certified doorsets and careful installation.
Which rules apply in Renfrewshire & Inverclyde?
Fire doors in Renfrewshire & Inverclyde follow Scottish building standards for new work, with the Fire (Scotland) Act 2005 covering duties in workplaces and other non-domestic premises. Shared residential buildings may also be covered by licensing conditions, for example for HMOs.
Guide prices in Renfrewshire & Inverclyde
Guide prices for FD90 and FD120 fire doors in Renfrewshire & Inverclyde run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD90 and FD120 fire doors are needed
Paisley, Renfrew and Greenock combine traditional tenements and council blocks with Glasgow Airport-related industry.
- Transformer and switch rooms
- Generator rooms
- High fire-load stores
- Separating walls with long ratings
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Renfrewshire & Inverclyde
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Common questions in Renfrewshire & Inverclyde
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset.
Will I get certificates for the doors fitted?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can you fit just one door?
Yes — from a single door to a full building.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
Towns in Renfrewshire & Inverclyde we cover for FD90 and FD120 fire doors
FD90 & FD120 Doorsets in neighbouring areas
Other fire doors in Renfrewshire & Inverclyde
- FD30 Fire Doorsets in Renfrewshire & Inverclyde
- FD30S Smoke Control Doorsets in Renfrewshire & Inverclyde
- FD60 Fire Doorsets in Renfrewshire & Inverclyde
- Flat Entrance Fire Doors in Renfrewshire & Inverclyde
- Communal & Corridor Fire Doors in Renfrewshire & Inverclyde
- Stairwell & Escape Route Doors in Renfrewshire & Inverclyde
- HMO Fire Doors in Renfrewshire & Inverclyde
- Fire Doors for Homes in Renfrewshire & Inverclyde
- Riser & Service Cupboard Doors in Renfrewshire & Inverclyde
- Commercial & Office Fire Doors in Renfrewshire & Inverclyde
- School & Healthcare Fire Doors in Renfrewshire & Inverclyde
- Timber Fire Doorsets in Renfrewshire & Inverclyde
- Composite Fire Doors in Renfrewshire & Inverclyde
- Steel Fire Doors in Renfrewshire & Inverclyde
- Glazed Fire Doors in Renfrewshire & Inverclyde
- Double & Leaf-and-a-Half Fire Doors in Renfrewshire & Inverclyde
- Fire-Rated Screens & Fanlights in Renfrewshire & Inverclyde
- Acoustic Fire Doors in Renfrewshire & Inverclyde
- Security Fire Doors in Renfrewshire & Inverclyde
- Fire Exit Doors in Renfrewshire & Inverclyde
- Fire Door Ironmongery & Closers in Renfrewshire & Inverclyde
- Fire Door Replacement in Renfrewshire & Inverclyde
- Fire Door Supply & Fit in Renfrewshire & Inverclyde
- All fire doors in Renfrewshire & Inverclyde
