FD60 fire doors in Hull: how we work
Fire Rated Doors supplies and fits FD60 fire doors in Hull, East Riding of Yorkshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Hull is one of the main towns we cover in East Riding of Yorkshire; tell us your dates and we'll arrange a survey.
Which rules apply in Hull?
Because Hull is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD60 fire doors in East Riding of Yorkshire
Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Hull quote is fixed after survey and itemised door by door.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD60 fire doors are needed
Wherever they are in Hull, FD60 fire doors are most often specified for higher-risk stores and plant and boiler rooms.
Hull's port, industrial units and terraced housing sit alongside market towns such as Beverley and coastal resorts like Bridlington.
- Higher-risk stores
- Plant and boiler rooms
- Compartment walls
- Stair cores in taller blocks
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD60 fire doors in Hull
Which rules do FD60 fire doors in Hull need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Hull.
Is the survey in Hull free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Nearby towns we cover
- Beverley (8 miles)
- Grimsby (16 miles)
- Scunthorpe (17 miles)
- Cleethorpes (18 miles)
- Goole (22 miles)
- Bridlington (24 miles)
Other products in Hull
- School & Healthcare Fire Doors in Hull
- Security Fire Doors in Hull
- Commercial & Office Fire Doors in Hull
- Fire Exit Doors in Hull
- Glazed Fire Doors in Hull
- Acoustic Fire Doors in Hull
- Communal & Corridor Fire Doors in Hull
- Fire Door Ironmongery & Closers in Hull
- FD60 Fire Doorsets across East Riding of Yorkshire
- All fire doors in Hull