Certified FD60 fire doors for Beverley
We cover Beverley and nearby Hull for FD60 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Beverley is about 8 miles from Hull. Wherever your building is in HU17, we arrange survey and fitting dates around access and occupancy.
What the law says in Beverley
Because Beverley is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do FD60 fire doors cost in Beverley?
Our guide price for FD60 fire doors in Beverley is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD60 fire doors are used in Beverley
Wherever they are in Beverley, FD60 fire doors are most often specified for stair cores in taller blocks and higher-risk stores.
Hull's port, industrial units and terraced housing sit alongside market towns such as Beverley and coastal resorts like Bridlington.
- Stair cores in taller blocks
- Higher-risk stores
- Plant and boiler rooms
- Compartment walls
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD60 fire doors in Beverley: questions
What does a Beverley quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you work around tenants or staff in Beverley?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Is the survey in Beverley free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Nearby towns we cover
- Hull (8 miles)
- Bridlington (19 miles)
- Scunthorpe (20 miles)
- Goole (21 miles)
- Grimsby (24 miles)
- Cleethorpes (25 miles)
Other products in Beverley
- Double & Leaf-and-a-Half Fire Doors in Beverley
- HMO Fire Doors in Beverley
- FD30S Smoke Control Doorsets in Beverley
- Fire Door Ironmongery & Closers in Beverley
- Fire Doors for Homes in Beverley
- Flat Entrance Fire Doors in Beverley
- Acoustic Fire Doors in Beverley
- Fire Exit Doors in Beverley
- FD60 Fire Doorsets across East Riding of Yorkshire
- All fire doors in Beverley