Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SPairsHold-open

Communal & Corridor Fire Doors in Mid Glamorgan

We supply and fit communal fire doors throughout Mid Glamorgan, including Rhondda, Tonypandy and Bridgend, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £1,600 per pair in Mid Glamorgan, supplied & fitted, ex VAT

Pair of white timber cross-corridor fire doors with vision panels and hold-open devices

Certified communal fire doors for Mid Glamorgan

We supply and fit communal fire doors across Mid Glamorgan, including Rhondda, Tonypandy and Bridgend. Every job starts with a free measure survey and ends with a handover pack listing each certified doorset fitted.

What the law says in Mid Glamorgan

Wales issues its own version of Approved Document B, so new and replacement fire doors in Mid Glamorgan are specified against the Welsh guidance. The Regulatory Reform (Fire Safety) Order 2005 applies in Wales, covering workplaces and the common parts of multi-occupied residential buildings, including flat entrance doors.

Cost of communal fire doors in Mid Glamorgan

Our guide price for communal fire doors in Mid Glamorgan is £1,600 to £3,200 per pair including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Where communal fire doors are used in Mid Glamorgan

The valleys towns of Mid Glamorgan have extensive terraced housing, schools and public buildings, with Bridgend adding industrial estates.

  • Blocks of flats
  • Sheltered and supported housing
  • Student accommodation
  • Hotels

Communal & Corridor Fire Doors: key specification

RatingFD30S typical; FD60S in some lobbies
ConfigurationSingles, pairs and leaf-and-a-half
GlazingVision panels sized to the doorset's evidence
Hold-openAlarm-linked magnetic hold-open or free-swing closers (BS EN 1155)
AccessibilityOpening forces and vision panels to accessibility guidance (Approved Document M in England)
Elevation drawing of communal & corridor fire doors

See the full specification and options for Communal & Corridor Fire Doors

How it works in Mid Glamorgan

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Your questions answered

Can you work around tenants or staff?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Do you cover the whole of Mid Glamorgan?

Yes. We survey, supply and fit communal fire doors across Mid Glamorgan, including Rhondda, Tonypandy and Bridgend.

Which rules apply in Mid Glamorgan?

Doors are specified to Approved Document B (Wales) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Can communal fire doors be held open?

Only with an approved hold-open or free-swing device linked to the fire alarm. Wedges and hooks are not acceptable.

Towns in Mid Glamorgan we cover for communal fire doors

Communal & Corridor Fire Doors in neighbouring areas

Other fire doors in Mid Glamorgan

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.