FD30 Fire Doorsets for Mid Glamorgan buildings
Our Mid Glamorgan service covers FD30 fire doors for flats, HMOs, workplaces, schools and homes, including Rhondda, Tonypandy and Bridgend.
Which rules apply in Mid Glamorgan?
Fire doors in Mid Glamorgan are covered by the Welsh Building Regulations guidance for new work and by the Fire Safety Order 2005 for existing premises. Your fire risk assessment will say which doors need replacing and to what rating.
What do FD30 fire doors cost in Mid Glamorgan?
Guide prices for FD30 fire doors in Mid Glamorgan run from about £750 to £1,150 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Mid Glamorgan
The valleys towns of Mid Glamorgan have extensive terraced housing, schools and public buildings, with Bridgend adding industrial estates.
- Offices and retail back-of-house
- HMO bedrooms and kitchens
- Hotel corridors
- Plant rooms and stores
What's in the doorset
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
FD30 fire doors in Mid Glamorgan: questions
Is the survey free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Will I get certificates for the doors fitted?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Can you fit just one door?
Yes — from a single door to a full building.
Can I fit an FD30 door into my existing frame?
Only if the manufacturer's evidence allows that frame, which is rare. We normally supply the complete doorset with a new frame so the certification carries through to the finished job.
Towns in Mid Glamorgan we cover for FD30 fire doors
FD30 Fire Doorsets in neighbouring areas
Other fire doors in Mid Glamorgan
- FD30S Smoke Control Doorsets in Mid Glamorgan
- FD60 Fire Doorsets in Mid Glamorgan
- FD90 & FD120 Doorsets in Mid Glamorgan
- Flat Entrance Fire Doors in Mid Glamorgan
- Communal & Corridor Fire Doors in Mid Glamorgan
- Stairwell & Escape Route Doors in Mid Glamorgan
- HMO Fire Doors in Mid Glamorgan
- Fire Doors for Homes in Mid Glamorgan
- Riser & Service Cupboard Doors in Mid Glamorgan
- Commercial & Office Fire Doors in Mid Glamorgan
- School & Healthcare Fire Doors in Mid Glamorgan
- Timber Fire Doorsets in Mid Glamorgan
- Composite Fire Doors in Mid Glamorgan
- Steel Fire Doors in Mid Glamorgan
- Glazed Fire Doors in Mid Glamorgan
- Double & Leaf-and-a-Half Fire Doors in Mid Glamorgan
- Fire-Rated Screens & Fanlights in Mid Glamorgan
- Acoustic Fire Doors in Mid Glamorgan
- Security Fire Doors in Mid Glamorgan
- Fire Exit Doors in Mid Glamorgan
- Fire Door Ironmongery & Closers in Mid Glamorgan
- Fire Door Replacement in Mid Glamorgan
- Fire Door Supply & Fit in Mid Glamorgan
- All fire doors in Mid Glamorgan