FD60 fire doors in Aberdare | Supplied & Fitted

Getting FD60 fire doors fitted in Aberdare

For landlords, managing agents, businesses and homeowners in Aberdare, we provide FD60 doorsets for compartment walls, cores and plant rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.

We cover CF44 and the surrounding area, including Rhondda. Tell us your postcode and preferred dates and we'll confirm a survey slot.

Fire door rules in Aberdare

Wales issues its own version of Approved Document B, so new and replacement fire doors in Aberdare are specified against the Welsh guidance. The Regulatory Reform (Fire Safety) Order 2005 applies in Wales, covering workplaces and the common parts of multi-occupied residential buildings, including flat entrance doors.

FD60 fire doors prices in Aberdare

Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Aberdare quote is fixed after survey and itemised door by door.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Where FD60 fire doors are used in Aberdare

Compartment walls and higher-risk stores are among the most common settings for FD60 fire doors, in Aberdare as elsewhere.

The valleys towns of Mid Glamorgan have extensive terraced housing, schools and public buildings, with Bridgend adding industrial estates.

Compartment walls
Higher-risk stores
Plant and boiler rooms
Stair cores in taller blocks

What's in the doorset

Fire resistance	60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf	54mm timber or steel
Smoke control	FD60S available with tested smoke seals
Typical use	Compartment walls, firefighting shafts, plant rooms
Hinges	Usually four hinges on timber leaves, per test evidence

See the full specification and options for FD60 Fire Doorsets

Four steps to compliant doors

Share your FRA or inspection findings
We confirm every door on site
Fixed quote, certified doorsets only
Fitted to the manufacturer's instructions, with photos

FD60 fire doors in Aberdare: questions

What does a Aberdare quote include?

Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.

Is the survey in Aberdare free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

How quickly can you survey in Aberdare?

We arrange surveys around your access needs and, where possible, combine Aberdare visits with other work in Mid Glamorgan. Tell us your preferred dates when you enquire.

Can I use an FD60 door where FD30 is required?

Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.

FD60 Fire Doorsets in Aberdare