Our Fulham supply and fit service
We cover Fulham and nearby Chelsea for fire door closers and ironmongery, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Fulham is about 4 miles from London. Wherever your building is in SW6, we arrange survey and fitting dates around access and occupancy.
What the law says in Fulham
Because Fulham is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Fire door closers and ironmongery prices in Fulham
Expect roughly £120–£500 per item for fire door closers and ironmongery, fitted, ex VAT. Your Fulham quote is fixed after survey and itemised door by door.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need fire door closers and ironmongery
Seal and signage replacement and access control preparation are among the most common settings for fire door closers and ironmongery, in Fulham as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Seal and signage replacement
- Access control preparation
- Failed closers and hinges
- Busy corridors needing hold-open
Fire Door Ironmongery & Closers: key specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Tell us about the doors — photos help
- Free measure survey at your Fulham property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in Greater London
Can you fit just one door in Fulham?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Fulham.
Can you work around tenants or staff in Fulham?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can I use any hinge on a fire door?
No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.
Nearby towns we cover
- Chelsea (1 mile)
- Putney (2 miles)
- Battersea (2 miles)
- Shepherd's Bush (2 miles)
- Barnes (2 miles)
- Notting Hill (2 miles)
Other products in Fulham
- HMO Fire Doors in Fulham
- Riser & Service Cupboard Doors in Fulham
- School & Healthcare Fire Doors in Fulham
- Timber Fire Doorsets in Fulham
- Flat Entrance Fire Doors in Fulham
- Communal & Corridor Fire Doors in Fulham
- FD90 & FD120 Doorsets in Fulham
- Fire-Rated Screens & Fanlights in Fulham
- Fire Door Ironmongery & Closers across Greater London
- All fire doors in Fulham